K1R11/6-230S20
Square emergency luminaire for escape route lighting. Surface mounted. For central supply. Dimensions: 152 mm x 152 mm x 38 mm. Polycarbonate housing with sunk optics and flush aspect, screwless opening, automatic electrical connection, screwless wire terminals (up to 2.5 mm²), optional accessories for recessed mounting, four break-out ports Ø13mm. Concentrated light distribution, optimized for high mounting or staircase illumination. Lumen output in emergency mode: 550 lm. Power consumption in standby: 7.5 W. Inderdistance escape route: at a mounting height of 2.8 m, the illumination on the floor is 1 lux with an interdistance ("b") of 11.7 m. Interdistance anti-panic: at a mounting height of 2.8 m, the illumination on the floor is 0.5 lux with an interdistance ("b") of 9.6 m. At a mounting height of 2.8 m, the illumination on the floor is 1 lux with an interdistance ("b") of 8.4 m. Voltage: 220-230V. Automatic functional test every week, duration every test 13 weeks, in accordance to EN 50172 and EN 62034. Monitoring and control via ESM software for central maintenance. Polarity independent connection via two wire BUS communication. Maintained/non maintained mode selectable, preset for most common application. Electrical insulation class: class II. Photobiological safety IEC/TR 62778: >1m RG1 ; <1m RG2. Impact-resistant polycarbonate housing, RAL9003 - signal white. IP protection level: IP42. IK protection level: IK04. Ambient temperature: -20°C - 35°C. Glowwire: 850°C. 5 years warranty on luminaire, light source, driver and battery (for autonomous luminaires). Certifications: CE, ENEC. The luminaire has been developed and produced according to standard EN60598-1 in a company that is ISO9001 and ISO14001 certified.