According to your project and space, you can choose between:

The driver is one of the most critical components in LED solutions. The quality of LED luminaires not only depends on the LED light source and optical design, but also on the efficiency and reliability of the driver. A good LED driver must meet seven quality requirements:

• Lifetime.
• Efficiency.
• Power factor.
• Electromagnetic compatibility (EMC).
• Switching current (Inrush current).
• Waveform current.
• Mains voltage filtering.

Drivers are therefore crucial components in all LED solutions. High-quality drivers can be recognised by requesting the technical fact sheets from the manufacturer to check if the above quality requirements are met. ETAP always provides quality LED drivers, perfectly adapted to the solution and thoroughly tested in our labs.

3000 K = warm white

4000 K = natural white

5000 K = cool white

ETAP's recessed luminaires are suited for lay-in mounting in ceiling systems with T-profiles.

Other ceiling systems are possible too! Contact ETAP for a customized solution for your ceiling system.

The specific luminous flux reflects the relationship between luminous flux and power consumption. Just as with fluorescents, a distinction must be made between the light source’s specific luminous flux (LED component, measured at 25° or 85°C junction
temperature and with a standard control current) and that of a luminaire, including driver and optics.