K1R122/3-A-A630A630

Square emergency luminaire for anti-panic lighting. Surface mounted. C0:C90 value of this luminaire: A630:A630.
impact-resistant polycarbonate
LED • CRI (Ra) 70
lens • acrylic (PMMA)
300 lm
anti-panic lighting
EST+ self-test

CRI 90

Most of our products are also available in CRI (Ra) 90.

Please contact our sales department for more information

LLMF

The figure that reflects the drop in luminous flux of the light source (LLMF) takes into account failing LEDs, and deterioration of the light output over time. How do we determine this LLMF? We distinguish between the service life of LEDs at the component level and at the luminaire level.

At the component level we take into account the gradual deterioration of the luminous flux of the LEDs (parametric failure or B-lifetime), and the potential breakdown of LEDs (catastrophic failure or C-lifetime). At the luminaire level the complete failure of a luminaire is not relevant (see Luminaire Survival Factor). The LLMF corresponds with the B-lifetime at the luminaire level and hence takes on board the parametric as well as catastrophic failure of the individual LEDs in the luminaires.

In order to achieve an accurate, reliable LLMF for our luminaires, we carry out a ‘principal component analysis’:

  • We determine the parametric failure at the component level in accordance with objective LM80/TM21.
  • We are unable to calculate the catastrophic failure, but prefer to collaborate with manufacturers who make accurate data available. Whenever no measurement data are offered, we depend on electronic reliability models (MIL-HBK-217F)

UGR

Unified Glare Rating

This is an approximate model expressing the risk of glare.

The standard values range from UGR 16 (low risk of glare) to UGR 28.
In the standard for workplace lighting EN12464-1, limit values for UGR are imposed for various rooms.

Unified Glare Rating

Quick downloads

x

Tender description

K1R122/3-A-A630A630 Square emergency luminaire for anti-panic lighting. Surface mounted. C0:C90 value of this luminaire: A630:A630. Autonomous luminaire (contains battery). Dimensions: 152 mm x 152 mm x 38 mm. Polycarbonate housing with sunk optics and flush aspect, screwless opening, automatic electrical connection, screwless wire terminals (up to 2.5 mm²), optional accessories for recessed mounting, four break-out ports Ø13mm. Square light distribution, optimized to avoid dark spots. Lumen output in emergency mode: 300 lm. Power consumption in standby: 0.9 W. Interdistance anti-panic: at a mounting height of 2.8 m, the illumination on the floor is 0.5 lux with an interdistance ("b") of 12.7 m. At a mounting height of 2.8 m, the illumination on the floor is 1 lux with an interdistance ("b") of 12.1 m. Voltage: 220-230V. Autonomy: 90 minutes. The luminaire contains lamp data, battery date and type as required according to EN 60598-2.22. Battery: 4 x NiMh 1,2V 2,2Ah. Battery lifetime: 8 years. Automatic functional test every week, duration test every 13 weeks, in accordance to EN 50172 and EN 62034. Maintained/non maintained mode selectable, preset for most common application. Electrical insulation class: class II. Photobiological safety IEC/TR 62778: RG1. Impact-resistant polycarbonate housing, RAL9003 - white. IP protection level: IP42. IK protection level: IK04. Ambient temperature: 5°C - 35°C. Glowwire: 850°C. 5 years warranty on luminaire, light source, driver and battery (for autonomous luminaires). Certifications: CE, ENEC. The luminaire has been developed and produced according to standard EN60598-1 in a company that is ISO9001 and ISO14001 certified.