Industrial dust- and waterproof luminaire. Surge protection 1kV/2kV (for light industrial environments).
LED • 4000 K • CRI (Ra) 80
linear lens • polycarbonate (PC) • wide-angle
<= 28
3050 lm
122 lm/W
99% @ 50khrs (Tq=25°C)

CRI 90

Most of our products are also available in CRI (Ra) 90.

Please contact our sales department for more information


The figure that reflects the drop in luminous flux of the light source (LLMF) takes into account failing LEDs, and deterioration of the light output over time. How do we determine this LLMF? We distinguish between the service life of LEDs at the component level and at the luminaire level.

At the component level we take into account the gradual deterioration of the luminous flux of the LEDs (parametric failure or B-lifetime), and the potential breakdown of LEDs (catastrophic failure or C-lifetime). At the luminaire level the complete failure of a luminaire is not relevant (see Luminaire Survival Factor). The LLMF corresponds with the B-lifetime at the luminaire level and hence takes on board the parametric as well as catastrophic failure of the individual LEDs in the luminaires.

In order to achieve an accurate, reliable LLMF for our luminaires, we carry out a ‘principal component analysis’:

  • We determine the parametric failure at the component level in accordance with objective LM80/TM21.
  • We are unable to calculate the catastrophic failure, but prefer to collaborate with manufacturers who make accurate data available. Whenever no measurement data are offered, we depend on electronic reliability models (MIL-HBK-217F)


Unified Glare Rating

This is an approximate model expressing the risk of glare.

The standard values range from UGR 16 (low risk of glare) to UGR 28.
In the standard for workplace lighting EN12464-1, limit values for UGR are imposed for various rooms.

Unified Glare Rating

Quick downloads


Tender description

E62/LED2N30S Industrial dust- and waterproof luminaire. Surge protection 1kV/2kV (for light industrial environments). Linear lens optics, polycarbonate (PC), wide-angle light distribution. Coextrusion housing. For use in technical spaces and parking lots. Dimensions: 880 mm x 56 mm x 80 mm. Luminous flux: 3050 lm, Luminous efficacy: 122 lm/W. Power: 25.0 W, not dimmable. Frequency: 50-60Hz AC. Voltage: 220-240V. Electrical isolation class: class I. LED with very good light maintenance; at 50000 hrs the luminaire retains 99% of it's initial flux (Tq=25°C). Correlated colour temperature: 4000 K, Colour rendering ra: 80. Standard deviation colour matching satisfy 3 SDCM. Photobiological safety IEC/TR 62778: RG1. Polycarbonate housing, RAL7037 - dusty grey. IP protection level: IP66. IK protection level: IK07. Replaceable (LED only) light source by a professional. Replaceable control gear by a professional. Ambient temperature: -20°C - 35°C. Glowwire: 850°C. 5 years warranty on luminaire and driver. Certifications: CE, ENEC. Luminaire with halogen free leads. The luminaire has been developed and produced according to standard EN60598-1 in a company that is ISO9001 and ISO14001 certified.